If your tiled room is beautiful except for dingy tile grout, you might want to look into using a grout colorant to make the whole room look better. Your tiled floors will be so much more attractive if you had used a different color grout than off-white. But who wants to remove all the grout and start over? That’s a lot of work on a job that has already taken a lot of work to start with.
The solution is simple – you can restore your grout to a uniform, attractive color by applying a colorant that’s made specifically for grout. It’s also known as grout paint, and you can purchase various pre-mixed colors and some custom blended colors. The colorant products made today are easily applied, they look great, and they can last up to fifteen years.
Using a colorant on old and dingy grout can show off the room the way you’d like it to look. It still retains its look as actual grout, so the tiled floor won’t look like a laminate. Preparing and applying grout coloring is different than just painting a wall. You’ll still want to use a brush, and you can do it easily as long as you are comfortable kneeling for a prolonged period of time. If you’re using grout colorant on a large room, you may be kneeling for hours! It’s not as easy as it sounds. You’ll also need a good dose of patience, and be sure to follow all the label instructions on the product you choose.
Every different brand of colorant for grout may have different instructions, so choose the brand first. The things that vary between brands include waiting time, drying time and methods of application.
There are various types of grout coloring that experts will recommend, depending on the experience they have had with the product. A tile layer has probably used many different kinds of coloring for grout, and will know which ones are easiest to apply, and which ones yield the best results. Most professionals use a product that doesn’t take a long time to dry. But in some jobs, it’s actually beneficial to have a slower drying product. Some brands of grout coloring may require that you finish applying the product and clean-up within the space of an hour. This is not always possible, if you’re working on a larger room.
You’ll want to inspect your floor first, and replace any old grout that is broken down. Don’t wait until coloration is done to make repairs. Do them first. If the colorant you apply doesn’t precisely match the shade on the floor, you don’t need to worry – your new color should show up when everything dries.
If your floor is terrazzo or natural stone, or another unglazed tile, be sure to seal it before you color the grout. Grout coloring can stain the flooring permanently. A fresh coat of sealant may make the grout coloration stick less easily to your grout, so you may have to be patient and go from one tile to the next. Here is one case where you don’t want a fast-drying grout colorant.
- Comments Off
- Read Entire Post
When you set out learning how to grout tile, it may be due to crumbling or disintegrating grout in your tiles that were laid by someone else. This happens if too much water is added to the grout mixture when it is initially made. Nearly all tile floors have grout made with Portland cement. Some brands of grout might have added ingredients like acrylic modifiers or powdered latex, to help them bond better. Liquid acrylics can also be mixed into your grout, which will make it more durable.
Portland cement is not stable. It only becomes stable when it’s mixed with water. It can pull water from humidity in the air, or from water you will mix it with. Grout should be of a consistency that sticks easily to your putty knife, but it should not fall off your knife. If it does, it’s too runny. When you begin to mix the dry portion of grout with water, it should originally look like a powder. There shouldn’t be any clumps or lumps. If you have clumps in your dry powder, it has already started mixing with a source of water vapor in the air. The grout should look like a bag of flour, before you mix it.
When you mix water and grout, don’t just add random amounts of the ingredients. It’s just like making pancake or cake batter. Don’t add too much water, or you’ll be trying to determine how to grout tile with a mixture that is too runny.
Your grout mix of Portland cement and water should be the consistency of thick cake batter. Once you mix grout, if it appears too runny, add more of your powdered grout and blend it until it thickens. This is why it’s a good idea to mix only part of your grout bag at the start. This will leave you with extra powder, in case you mistakenly add a too-large amount of water when you mix it. You will also only want to mix as much as you’re going to be able to apply within a half hour.
Grout can also be ruined by an installer even if the mixture is exactly right. If the bottom of the bucket was getting dry, he may have added water, and this breaks down the bonds that hold grout together. Your grout will not be a plastic compound any more, it will be like rock.
Grout cures the best in an area that doesn’t have a lot of humidity. But if your humidity is too low, the water in your grout mixture may evaporate too fast. If this occurs, your grout may lose strength. You can cure grout in an area with low humidity by covering your tiles that have just been grouted with damp white-colored paper towels. They will stick to the tile and give it a “drink”. Then you will need to mist the paper towels each hour so that you’ll have learned how to grout tile with the fewest problems.
- Comments Off
- Read Entire Post
When grout ages, it can become darker due to dirt and traffic, so you may want to use a grout whitener on your tiled floors. This will go a long way towards helping your kitchen or bathroom look new again. You can lighten the color of your grout by using an inexpensive, simple process. Most homeowners will prefer to lighten or whiten their grout periodically, to keep their rooms looking their best. Others may not worry about it until it’s time for visitors, or until they put their house up for sale. Whenever you decide to do it, lightening the color of grout will help your home look its best.
To lighten grout, wash the whole area first with clean water, and let it dry. Put on a pair of gloves and turn a fan on for proper ventilation. Next, apply grout lightener to all the lines of grout in your tiled room. Dab your sponge with the whitener, so that it is fully absorbed into the grout lines. Then give the grout lightener plenty of time to dry.
Next, wipe off the excess whitener from your tiles, with paper towels. Don’t be afraid to get in there and use some elbow grease to remove the excess from the tiles. It should come off pretty easily, and then you can wipe or sweep it up. Wait about a day before you get the grout lines wet again by using the tiled floor. You can use lots of grout whitener on your tile grout without worry. Too much is a better thing than to not use enough. Air out the room the whole time you work, and when it’s drying. Also note that grout lightener won’t work on silicone or caulk, only on grout.
You can also lighten grout naturally. There are lots of chemicals on the market, and every manufacturer says that their product is the best. Some of these items are fairly pricey, too. Cleaning with more natural products can help you to save money, and it will also free up your income for other things.
One of the things that people use to clean and lighten grout is whitening toothpaste. Use a toothbrush with soft bristles, and make circular motions to get the stains off. Cleaning your teeth is a lot like cleaning your grout, with baking soda and other helpful ingredients that help grout cleaning, too. Tile grout tends to be porous, and grime and dirt can stick in the grouted areas. Use the toothpaste in the cracks and crevices of grout, and it will bubble up and help your cleaning process. Using a cup of water, toothpaste and a toothbrush, you can use scrubbing motions to help lighten the grout.
If you find some stubborn stains that won’t lighten, try using lemon juice on the tiled area and let it stand for a number of minutes, to loosen the particles causing the stain. Don’t use lemon juice on travertine tiles, because the acid can etch into their finish. A combination of one part water to one part cheap bleach may also be able to work as a grout whitener.
- Comments Off
- Read Entire Post